EQT 5 Bar TMAP/PUT Sensor Bundle Kit - VW/Audi MQB 1.8T/2.0T

For VW/Audi MQB Cars
Whenever upgrading your turbocharger to a larger than stock unit, and looking to produce more than 29Psi of boost pressure (Manifold Relative Pressure / Boost) you need to upgrade your TMAP and PUT Sensor in order to allow the ECU proper visibility and control over the pressure. Luckily, we have a plug-and-play solution to do just that!

EQT 5 Bar TMAP (Temperature / Manifold Absolute Pressure) sensor that plugs right into the OEM location on top of the intake manifold and utilizes a factory connector so no wiring, adapter harness, or need to modify your intake manifold!
EQT 5 Bar PUT (Post Upstream Throttle) that is installed right into your OEM or aftermarket throttle pipe.Easy Plug-and-Play Installation
Please note: custom tuning it required. Upgraded sensors will not work on factory/staged tune applications.

These sensor replace the factory location sensors and installation/removal is the same as OEM. Please reference your Factory Service Manual for the correct procedure.

The EQT TMAP sensor replaces the G71/G42 Sensor on your vehicles intake manifold as shown in the diagram below
The EQT 5 Bar PUT sensor will go in place of the OE G31 Sensor on your vehicles throttle pipe as shown in the diagram below.